伺服橫走式機械手BRTA07/09系列適用于80T-320T的各型臥式射出成型機的成品及水口取出。上下手臂結構是雙截式，分單臂和雙臂，適合二/三板模具產品取出。橫行AC伺服馬達驅動，定位精細，速度快，青浦區性能優良伯朗特機械手，壽命長，故障低，青浦區性能優良伯朗特機械手。安裝機械手可增加產能(10-30％)、降低產品的不良率、保障操作人員的安全性、減少人工、精細控制生產量、減少浪費、保證交期BRTA07/09 Series traversing robot arm is applicable to alltypes of horizontal injection machine ranges of 807-320Tfor take-out products and sprues. Vertical arm is telescopictype, with product arm and runner arm，青浦區性能優良伯朗特機械手, for two plate orthree plate mold products take out. Traverse axis driven byAC servo motor. After installed this robot, the productivitywill be increased 10-30%, reduce defective rate, ensuresafety of operators, reduce manpower and accuratelycontrol the output to reduce waste

一、兩板模：(1)手動脫模A：夾取料頭(成品與料頭連在一起，機械手取出后再人工分離成品與料頭)。B：吸取或抱取成品(成品與料頭連在一起，用機械手吸取或抱取成品)。C：夾取料頭，吸取或抱取成品(成品與料頭在射出機頂出時，成品與料頭已分開，用機械手取出后，可分別置放料頭和成品于不同處。(2)自動脫模A：夾取料頭，分離料頭(夾取料頭，讓成品自動脫落分離成品與料頭)。B：分離不同狀況的成品(夾取料頭，吸取或抱取成品分離成品與料頭)。C：吸或抱取成品分離成品(吸或抱取成品，讓料頭自動脫落分離成品與料頭)。二、三板模：(1)成品、料頭均不能自動脫落A：成品臂吸取或抱取成品，料頭臂夾取料頭。用機械手使成品與料頭分離(雙臂機械手)。B：料頭臂夾取料頭，成品臂掃落成品讓其達成自動脫模方式，分離成品與料頭。(2)成品可自動脫落，料頭不可自動脫落A：夾取料頭，成品自動脫落，分離成品與料頭(單臂機械手)。B：成品臂吸取或抱取成品，料頭臂夾取料頭，用機械手分離成品與料頭(雙臂機械手)。

BRTR Series is applicable to all types of horizontal injection machineranges of 30T-100T for take-out products and sprues Vertical armis single stage. With types of three-axis and five-axis driven by ACservo motor Products take-out at super high-speed(1sec. )and drycycle time within seconds, applicable to take-out products withshort forming cycle or complex automatic. Also with the function ofmold labeling and mold inserting

HC three-axis/five axis CANOPEN connecting way

Less connecting line, long distance communication, goodexpansibility, strong anti-interference ability, high repeatprecision, can simultaneously control multi axis, simple equipmentmaintenance, low fallure rate